Author |
Bonding 3-piece Slates |
Deejie
Just popping in Joined: 17-May-2021 Posts: 4
|
Posted: 2021-05-18 13:44
Hi all, new to all this as have fiiinally got hold of my own table...
It's a 7' brunswick which I'll store in an outdoor, mainly wooden workshop
But how to bond the 3-section slates?
I've seen an installer/engineer in the states refer to Bondo being a good choice for tables in garages which get very hot and cold.
In UK seems 3M body filler is a good comparison...?
ANY thoughts or advice on what t use very welcome.
|
BigDave
Moderators Joined: 13-Mar-2006 Posts: 10936
From: England
|
Posted: 2021-05-19 03:55
Yes, in the "olden days" wax was used to seal the gap between slates, then they used plaster, but car body filler is used almost exclusively now. [ This message was edited by: BigDave on 2021-05-19 03:56 ]
|