| Author |
moori question????? |
|
paddy147
Home away from home
Joined: 26-Mar-2006
Posts: 709
From: ireland
|
Posted: 2006-12-19 17:00
does anyone know if u can get moori tips in 11mm or 10mm????? -----------------
|
|
PC
Official Pro9 Tipster!
Joined: 14-Mar-2006
Posts: 780
From: Leeds
|
Posted: 2006-12-19 17:05
No you cant its either standard 14mm or the rarer 13mm or extinct 12mm. Other companys do make layered tips in smaller sizes for example talisman -----------------  [ This message was edited by: PC on 2006-12-20 10:40 ]
|
|
TheSurgeon
Home away from home
Joined: 13-Mar-2006
Posts: 529
From: Leeds
|
Posted: 2006-12-19 17:08
fountain of all tip knowledge is PC!
|
|
cusack_147
Home away from home
Joined: 17-Mar-2006
Posts: 991
From: Southport
|
Posted: 2006-12-19 17:10
You can get the standard Moori and shape it down to 10/11mm cause ive got a moori on my snooker cue at the moment.
|
|
PC
Official Pro9 Tipster!
Joined: 14-Mar-2006
Posts: 780
From: Leeds
|
Posted: 2006-12-19 17:21
cusack is right as i have 14mm snipers fitted to my 11.5mm Z shafts, just be careful when taking them down. ----------------- [ This message was edited by: PC on 2006-12-19 17:22 ]
|
|
JonnyC
Home away from home
Joined: 03-Aug-2006
Posts: 225
From: Leeds
|
Posted: 2006-12-19 20:27
KNOWLEDGE
|
|
paddy147
Home away from home
Joined: 26-Mar-2006
Posts: 709
From: ireland
|
Posted: 2006-12-20 01:30
how do they play on the snooker cue cusack????
|
|
Riggers
Home away from home
Joined: 30-Mar-2006
Posts: 4454
From: Barnsley (centre of the universe)
|
Posted: 2006-12-20 08:38
I used my pool cue with a Moori Soft last night on a snooker table and was pleasantly surprised with how nicely it played. I'd definately consider sticking one on my snooker cue.
|
|
77tricky
Not too shy to talk
Joined: 17-Sep-2006
Posts: 31
|
Posted: 2006-12-20 09:30
You can get mooris from 12mm in Quick slow and medium
|
|
paddy147
Home away from home
Joined: 26-Mar-2006
Posts: 709
From: ireland
|
Posted: 2006-12-20 10:08
where?????
|
|
PC
Official Pro9 Tipster!
Joined: 14-Mar-2006
Posts: 780
From: Leeds
|
Posted: 2006-12-20 10:36
I've never been able to find the 12mm is it on your site? i've even had american sites look for them for me? ----------------- [ This message was edited by: PC on 2006-12-20 10:37 ]
|
|
Riggers
Home away from home
Joined: 30-Mar-2006
Posts: 4454
From: Barnsley (centre of the universe)
|
Posted: 2006-12-20 10:43
Since you are just going to trim it all round the edges with a sharp knife what does it matter? [ This message was edited by: Riggers on 2006-12-20 11:28 ]
|
